The Oil & Gas industry requires solutions for high availability environments and critical load applications where uninterruptible power systems are considered critical equipment and therefore must comply with particular specifications also national and international standards.
Oil & Gas
KTRONIX´s provides Industrial Grade UPS with the latest Technology with Modular and Stand Alone UPS technology offering with PWM (Pulse Width Modulation), True On-Line, Double Conversion, Industrial Grade (VFI-SS-111), With Redundancy Options as N+1 to N+X, depending on the customer requirements .
The advanced design of the Conceptpower offers the highest degree of integrity power to critical loads when the load is powered continuously regulated by also redundant electronic control. While the supply network is present at the entrance of UPS, the rectifier, booster and inverter are active and the critical load is supplied by the inverter and is protected against variations in the supply network. If the input voltage is out of ranges, or fails completely, the load is being fed by the inverter and the battery Banks without any interruption to the load or the critical Process.
With galvanic isolation (by using K-13 Factor transformers) Input / Output UPS online and By-Pass alternative.
The modular design of Conceptpower UPS is the answer not only the normal commercial and industrial demands, but also to the individual customer Specifications. That's why Ktronix equipment are integrated and designed for each project.
KTRONIX has developed solutions for:
Fire & Gas Systems
Monitoring and process control systems
emergency systems
Electrical Systems
Distributed control systems
Emergency Lighting Systems
protection systems for substations
Water Treatment (Demineralization) Units
Pumping Stations
Drilling and Productions Offshores
Steel Process Industry
In the steel sector K-TRONIX has applications that require reliable equipment to ensure the continuity of the production process; we have developed solutions IN Industrial Grade UPS to give continuity to these manufacturing processes depending on the particular specification for each load including Travelling conveyors with feedback energy systems through drivers and motor back up.
Steel Process Industry
In K-tronix we develop solutions for each specific application, in the Steel Market of UPS, with a high degree of reliability and availability covering all the critical needs of each application, considering the highly conductive and polluted enviroment.
An easy way to manage the regeneration energy or feedback energy (energy of return generated by the loads) is the use of K-TRONIX UPS and the additional Break Unit which is an electrical device that absorbs the energy of feedback generated by motor loads when reducing speed or changing the rotation of the rotation via driver or control devices.
A detailed knowledge is required, of the electrical characteristics of the supplies and charges involved in the system (input voltage, input current, duty cycle and frequency) before connecting the UPS to the brake unit, and allowing this manner a suitable sizing of the Brake Unit and the general features of UPS, the studies of Power Quality are part of the Services offered by K-tronix. Have been successfully installed brake units in Germany, Romania, Portugal and Mexico.
Other applications of Break Unit are:
Conveyors, food processing machines, extruders, machinery, textiles, elevators, cable railway, positioning systems, transportation equipment, lifting gear, operated servo applications (valves, actuators), engines and centrifugal compressors, cranes, lifting devices, and facilities that have devices for transportation of materials and production.
Data Centers
Applications of Data Center scalability, availability and efficiency are all significant factors for the correct selection of backup power. In Ktronix Solutions have developed parallel architecture designed particularly for Data Centers.
Data Centers
Planning for the protection of energy for the future task becomes easy with the compact design of our equipment modules and UPScale DPA.
The design of DPA-Tronix equipment gives us flexible power protection and high availability to help those responsible for the backup power to design their systems to achieve the highest availability requirements. If energy demand grows, you can add one or two cabinets in parallel and the battery life can be increased by adding additional battery cabinets.
You can achieve high availability power protection by combining the double conversion technology (high reliability), advanced redundant parallel architecture (high availability) and the secure exchange modular technique (SAFE-Swap) (maximum availability).
To maintain high availability in time and therefore achieve continuous availability power protection NewavewatchTM has developed a Monitoring and Advanced Remote Management, based on maintenance.
Hospitals
K-TRONIX, aware of the critical applications that handle Specialty Hospitals and Diagnostic Imaging and, where the most important is to preserve health and life of humans, has developed solutions to the natural voltage of the medical equipment technology without transformers Our equipment meets safety standards and have the necessary availability for this market, this in modular and stand alone equipment, with redundancy options for increased availability of loads.
Hospitals
The team physician quality energy demand is sensitive to power surges and electrical disturbances in general is why K-TRONIX development solutions for natural voltage transformer equipment without thinking of the needs of our modular equipment team also offer greater availability and MTTR of 0.5 hours which is important for the type of loads or drive in a Hospital and Diagnostic Imaging Center.
Transportation
The Urban Electric Railway applications requires the highest secure levels in order to ensure the integrity of the users. The Power Protection (UPS) and the backup power systems must be reliable with redundancy options (as N+1 or N+2) to maintain continuous operation of the public transport system, Ktronix Transportation sector offers its series DPA and UPScale with modular equipment and redundancy options especially designed for these application.
Transportation
The design of the equipment UPScale and DPA offers a flexible power protection and high availability to help those responsible for the backup power to design their systems to achieve the highest availability requirements. If energy demand grows, you can add “n” number of modules in parallel and the battery life can be increased by adding additional battery cabinets in parallel.
Costumer can achieve high availability power protection by combining the double conversion technology (high reliability), advanced redundant parallel architecture (high availability) and the secure exchange modular technique (SAFE-Swap) that allows consider the shortest time to Repair the UPS (MTTR = Mean Time To Repair), with less than a 0.5 hours.
To maintain high availability in time and therefore achieve continuous power protection has developed a Monitoring and Advanced Remote Management NewavewatchTM, that allows predictive and preventive maintenance instead of Corrective actions.
Demonstrative Institutional
News 1
Quisque vel lorem turpis. Integer sed turpis justo, vitae congue nibh. Nam eget nisl vel urna fermentum. Leer más
News 2
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Quisque vel lorem turpis. Nam eget nisl vel urna fermentum. Leer más
